A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Comparison of γ-aminobutyric acid accumulation capability in different mung bean (Vigna radiata L.) varieties under heat and relative humidity treatment,and its correlation with endogenous amino acids and polyamines

In this study, the accumulation of GABA and its inherent factors across different varieties of mung bean (Vigna radiata L.) in response to heat and relative humidity (HRH) were investigated. Results showed the average GABA content in mung bean varieties was increased 7.52 times following HRH treatment, and the black mung bean variety (A8) exhibited the highest GABA accumulation capability (1.76–84.57 mg per 100 g DW). From the perspective of GABA shunt metabolites, the free glutamic acid content of mung beans significantly decreased (P < 0.05) after HRH treatment and presented a significant correlation (P < 0.05) with GABA content. In polyamine degradation pathway, although the average levels of spermine and spermidine of mung bean varieties significantly decreased (P < 0.05) after HRH treatment, no significant correlation with GABA content was identified. Hence, the GABA accumulation was predominantly attributed to GABA shunt. Besides, free amino acids including glutamic acid, serine, ornithine, arginine and glycine in mung beans showed a significant positive correlation (P < 0.05) with GABA content and increment following HRH treatment, which suggested that mung beans enriched in these free amino acids might accumulate higher amounts of GABA after HRH treatment and be useful for industrial applications.     

Electrocaloric effect and pyroelectric energy harvesting in diffuse ferroelectric Ba(Ti 1-x Ce x )O 3 ceramics

In the present work Ba(Ti1-xCex)O3 ceramics are prepared through a standard solid-state sintering process. Crystal structures, dielectric properties, ferroelectric properties and electrocaloric...     

Gelling behavior of MgAl2O4 slurries with a common dispersant

MgAl₂O₄ transparent ceramics were shaped by a commonly used polyacrylic acid (PAA), which acted as both dispersant and gelling agent. The spinel slurries were prepared by ball-milling MgAl₂O₄ powder, PAA, and water in an attrition mill. The gelling of slurries happened at room temperature in air atmosphere without any other organic additive. The gelling mechanism was the formation of chelates between Mg²⁺ and carboxyl groups (-COO⁻) of PAA. The frequency-based testing method was applied to investigate the gelling process of the as-prepared slurry. In addition, a novel in situ characterization method based on a modified indentation testing was invented to better understand the strengthening of the wet green body with time and to guide when demolding could be carried out. After sintering, transparent MgAl₂O₄ ceramics with high in-line transmittance were resulted.     

Biodegradation of Endocrine Disrupting Chemicals with Laccase Isozymes from Recombinant Pichia pastori

Catalysis Letters - In this paper, five recombinant strains: GS115-LacA, GS115-LacB, GS115-LacC, KM71H-Lcc1 and GS115-Lcc2 were selected to produce laccase isozymes with high activities, which...     

Improving tribocorrosion performance of chemically bonded ceramic phosphate coating reinforced by GO-ZnO

To enhance the tribocorrosion properties of chemically bonded phosphate ceramic coating (CBPCC), GO-ZnO was prepared and added into CBPCC. And the tribocorrosion behaviour of CBPCC was investigated. Results show that, with the introduction of GO-ZnO, the open circuit potential of CBPCC shifts in a positive direction and corrosion current density decreases. In addition, the total material loss, the total mechanical wear loss and the total electrochemical corrosion loss of CBPCC all decrease with the increase of GO-ZnO. The wear track of CBPCC after tribocorrosion without GO-ZnO is rough and porous, while the wear track becomes smooth and dense with the incorporation of GO-ZnO. The material in wear track is anchored by GO-ZnO due to the strong bond between GO-ZnO and CBPCC, which decreases the wear loss. Because of the extra force from the tribocorrosion experiment, the material anchored by GO-ZnO forms to a dense structure which prevents electrolyte diffusion into CBPCC. Moreover, GO-ZnO can block the electrolyte diffusion pathway and make it more tortuous. The resistance to the electrolyte diffusion decreases the corrosion current density and the increased wear loss due to electrochemical corrosion.     

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

The Ni-rich LiNi_0.83Co_0.12Mn_0.05O₂ (NCM83) cathode materials have drawn intensive attention due to the high energy density and low cost. However, Ni-rich LiNi_1-x-yCo_xMn_yO₂ still has the fatal weakness of poor cycle stability, limiting its further wide application. Bulk doping is an effective means to enhance the cycle stability, yet the electrochemical performances are very sensitive to the doping quantity. Here a facile method of co-precipitation is adopted to coat (Ni_0.4Co_0.2Mn_0.4)_1-xAl_x(OH)_2+x on precursor particles of NCM83. Al ions diffuse evenly in the NCM83 particles after sintering. The cells are operated at a high cut-off voltage of 4.5 V. The discharge capacity of NCM83 is 187.8 mAh g^?1, and decays fast with cycles. The doped sample even exhibits a higher discharge capacity of 195 mAh g^?1, and the capacity retention is improved to 83.8% after 200 cycles.     

Melanin-Like Nanomedicine in Photothermal Therapy Applications

Photothermal therapy (PTT) mediated by nanomaterial has become an attractive tumor treatment method due to its obvious advantages. Among various nanomaterials, melanin-like nanoparticles with nature biocompatibility and photothermal conversion properties have attracted more and more attention. Melanin is a natural biological macromolecule widely distributed in the body and displays many fascinating physicochemical properties such as excellent biocompatibility and prominent photothermal conversion ability. Due to the similar properties, Melanin-like nanoparticles have been extensively studied and become promising candidates for clinical application. In this review, we give a comprehensive introduction to the recent advancements of melanin-like nanoparticles in the field of photothermal therapy in the past decade. In this review, the synthesis pathway, internal mechanism and basic physical and chemical properties of melanin-like nanomaterials are systematically classified and evaluated. It also summarizes the application of melanin-like nanoparticles in bioimaging and tumor photothermal therapy (PTT)in detail and discussed the challenges they faced in clinical translation rationally. Overall, melanin-like nanoparticles still have significant room for development in the field of biomedicine and are expected to applied in clinical PTT in the future.     

Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Lithium-sulfur batteries (LSBs) are considered a promising next-generation energy storage device owing to their high theoretical energy density. However, their overall performance is limited by several critical issues such as lithium polysulfide (PS) shuttles, low sulfur utilization, and unstable Li metal anodes. Despite recent huge progress, the electrolyte/sulfur ratio (E/S) used is usually very high (≥20 µL mg⁻¹), which greatly reduces the practical energy density of devices. To push forward LSBs from the lab to the industry, considerable attention is devoted to reducing E/S while ensuring the electrochemical performance. To date, however, few reviews have comprehensively elucidated the possible strategies to achieve that purpose. In this review, recent advances in low E/S cathodes and anodes based on the issues resulting from low E/S and the corresponding solutions are summarized. These will be beneficial for a systematic understanding of the rational design ideas and research trends of low E/S LSBs. In particular, three strategies are proposed for cathodes: preventing PS formation/aggregation to avoid inadequate dissolution, designing multifunctional macroporous networks to address incomplete infiltration, and utilizing an imprison strategy to relieve the adsorption dependence on specific surface area. Finally, the challenges and future prospects for low E/S LSBs are discussed.     

煤矿采空区地表变形评价中的数值模拟分析

采空区的地表变形评价是煤矿灾害评价中的关键问题之一.目前主要是利用《建筑物、水体、铁路及主要井巷煤柱留设与压煤开采规程》中的概率积分法计算地表变形,但其预测结果往往与实际不符.该文以秀房沟煤矿为例,利用概率积分法和三维数值模拟法分别对其采空区地表变形进行预测,结果表明数值模拟法的预测结果比概率积分法的预测结果更接近于实际.结论证明数值模拟法能更好地克服概率积分法中的一些局限,对采空区地表变形的预测效果更佳,可用于煤矿采空区的地表变形评价.